Autocorr Plus Oximeter/ECG/Respiration

This week only: Free UPS Ground shipping within continental
USA with your order of $250.00 or more!

SPECIFICATIONS (Nominal):

The Autocorr� Plus, the fourth in the Clarity� Series is a cost-effective, versatile pulse oximeter. A high-resolution electroluminescent screen display provides two user configurable traces. An optional recorder (BCI, Inc. catalog #3408) provides for high-resolution graphics printing. Use as a stand-alone device, or combine with any of the other Clarity� Systems for multi-parameter monitoring.
Displays:

Display Electroluminescent

Resolution 160 x 80 pixels

Waveforms ECG, Plethysmogram

Graphic Trends SpO2, Pulse Rate (Heart Rate), Pulse

Signal Strength & Respiration

SpO2 3-digit (LED display)

0.56 inches (14.2 mm) high

Pulse Rate/ 3-digit (LED display)

Heart Rate (ECG) 0.43 inches (10.9 mm) high

Pulse Strength Logarithmically scaled 10-segment

LED bar graph

Respiration 3-digit 10 x 14 pixel font (EL Panel)

Indicators:

Low Battery LOW BATTERY message when

10 minutes of battery life remain

Audio Disabled SILENCED BELL icon indicates temporary or Indefinite status

Asystole Alarm ALARM LED will flash, ASYSTOLE message on screen flashes

SpO2 Sensor Message indicates sensor problem

SpO2 Search Message indicates monitor is searching for a pulse

Artifact Message indicates presence of excess motion or other artifact

ECG/Lead Fail Message indicates a lead disconnect condition

Charge Green LED indicates external power and battery is charging

Pace Detect A line appears on screen when pacemaker signal is detected

SpO2:

Range 0-100%

Accuracy �2% @ 70-100% �3% @ 50-69%

Alarm Range High: 50-100% & Off (1% steps)

Low: 50-100% & Off (1% steps)

Averaging 8, 16 pulse beat average

Pulse Rate (SpO2) or Heart Rate (ECG)

Range 30-254 bpm

Accuracy > of �2% or �2 bpm

Alarm Range High: 30-254 bpm & OFF (1 bpm steps)

Low: 30-254 bpm & OFF (1 bpm steps)

Averaging 8 or 16 second average

ECG:

Configuration 3- or 5-lead

Lead Selection I, II, III, aVR, aVL, aVF and V

Gain X1, X2, X4, X8

Pace Detect Yes

Pace Reject Yes

Sweep Speed 12.5 or 25 mm/sec

Respiration:

Measuring Method Impedance Pneumography

Rate 5 to 150 breaths/min

Accuracy > of �2% or �2 breaths/min over full range

Dimensions: 3.5" H x 10.0" W x 5.5" D

88.9mm H x 254mm W x 139.7 mm D

Weight:

5 pounds (2.27 kg)

AC Charger Power Requirements:

Wall Mount 105-125V ~, 60 Hz

100V ~, 50 Hz (optional)

Table Top 230V ~, 50/60 Hz

Battery Life:

Standard Lead - Acid battery:

Internal rechargeable; not user replaceable

Approximately 45 minutes continuous use

Fully charges in 6 hours

Printer Output:

Serial/Analog RS232C serial output of data

Optional digital (remote alarm) interface

Printer (Optional):

Catalog #3408 Printer provides data log (Interval) trends & waveform printouts

Environmental Specifications:

Operating Temperature 0� - 55� C

Storage Temperature -40� - 75� C (-40� - 167� F)

Relative Humidity 10-95% (storage)

(non-condensing) 15-95% (operating)

Safety Standards:

Safety EN60601-1, EN60601-1-1, UL 544,

CSA Std. C22.2 No. 125-1984

EMC EN60601-1-2